By design skirts divide: bias cut – Flare (such as "Sun" and "polusolntse"), flared and straight. Expansion of direct skirts often created using a single or bilateral folds and slot. Buckle in such articles should provide an accurate, tight, strong bond details. It can be located in the side seams, front, rear, ie, where it is more convenient to use and made fashionable. Zipper in the pants to do with reducing the design or single cut codpiece and slope. Means fasteners can be loops and buttons or zippers.

In the skirts at the clasp hooks and loops requires single cut allowances and obtachek, zipper operates in the seam. In skirts and trousers belt construction can be stitched or single cut. The upper sections of the belt korsazhnoy make out with tape or padding. Upon graduation belt buckle have a button or hook and loop. If the ends of the belt in favor of the edge of the main parts, the protruding ends attach the loop, and the main part of the belt – buttons. Time of trousers and skirts used to for a tight encirclement shape at the waist, to ensure the safety cut, trim the upper edge of these products.

If necessary, the belt should be adjustable length (strap, belt loops for belt finishing vdevaniya, stock fabric in the seams, elastic webbing). The bottom of the product shall be resistant to abrasion, thin slices of allowance for Acc should not flake off during wear. Width bending must meet the density and thickness of the material, as well as the structure of the bottom – with a larger bell-bending width is reduced. In products made of silk and wool fabrics podshivochnaya line should be imperceptible to front side. Bottom of pants on a design distinction without sleeves and cuffs. The bottom of the cuff without bending perform basic details, and to strengthen the edges of the reinforcing ribbon nastrachivayut. The cuffs are single cut or stitched. Single cut cuff formed an increased allowance for Acc. Stitched cuffs used in sports trousers, similar in structure stitched cuffs in the sleeves of dresses, blouses. The bottom of the skirt the most common represents the boundary with the seam vpodgibku obmetannym cut. In some models, the inner edge of the allowance okantovyvayut or overlapping ribbon.